Book, print and PDF specification tools

A2 Sheet Size in Inches

An A2 sheet is 16.54 × 23.39 in (420 × 594 mm). See it in every unit, in pixels at any DPI, and scaled to other sizes.

Open on Print Spec Desk

Embed

Embed this tool

Copy this code into your website, blog or class page. The tool runs inside your page.

Please keep the credit link below the tool.

The size of an A2 sheet in inches is 16.535 × 23.386 (about 16.5 × 23.4 inches), and this page shows that size in inches along with millimeters, centimeters, points and pixels. The page opens on A2 by default, so the answer is ready as soon as it loads. It also gives the aspect ratio and area, compares A2 with the sizes next to it, and works out how much a sheet must shrink to fit another size. The tool runs in your browser, is free, needs no sign-up, and does not upload anything. Use it when you need A2 measurements for a print file, a poster or a printer setup, and check final numbers against your printer’s current template.
Size of a2 sheet in inches example

How to use the A2 paper size tool

  1. Open the page. It starts on A2, so the “A2 in inches” row already shows 16.535 × 23.386 in.
  2. Read the large rows, “A2 in millimeters” and “A2 in inches”, for the main dimensions.
  3. Open the “Paper size” list to switch to another size. The outputs update for that sheet.
  4. Set “Custom DPI” (default 600) to the resolution you plan to print at. Then read the pixel figures in the table “Pixels at common DPI”, which also shows 72, 150 and 300 DPI.
  5. Choose a size in “Scale to fit onto” to see the percentage in “Scale to fit” and the “Best orientation” for the fit.
  6. Read “Compared with its neighbors” for A1 and A3.
  7. Use “Copy result”, “Copy link”, “Print / save as PDF” or “Reset” as needed.

You can also click a sheet in the diagram to make it the scale target. “Copy link” keeps your current settings in the page address, so you can return to the same view later. The “Compared with its neighbors” table lists A1 and A3 with the difference in width and height and the area ratio, so you can see at a glance which size your design will be enlarged or reduced to.

What is the size of an A2 sheet in inches?

A2 measures 420 × 594 mm, which is 16.535 × 23.386 inches. The metric size is the native value. The inch figure comes from dividing each side by 25.4, because one inch is exactly 25.4 mm. The result is rounded to three decimal places here.

The same sheet is 42 × 59.4 cm. Its area is 249,480 mm², or 2,494.8 cm², or about 386.69 square inches. Its aspect ratio is the long side divided by the short side, which is 594 ÷ 420, about 1.414. That ratio is the same for every A-series size, so a sheet can be enlarged or reduced without changing its proportions.

How do A2, A1, A3 and A4 relate to each other?

Each A-series size is half the size of the next larger one. A2 is half of A1 and twice the size of A3. Four A4 sheets (210 × 297 mm) fit exactly onto one A2 sheet, because 210 × 2 = 420 and 297 × 2 = 594.

This is why scaling A2 to A4 gives exactly 50 %. The tool works out the scale as the largest value, across both orientations, of the smaller of the two side ratios. For A2 onto A3, the figure is 100 × 420 ÷ 594, or 70.71 %. A value of 100 % means no scaling is needed. The paper size chart shows A0 to A10 side by side, which makes these relationships easy to compare.

What is A2 paper used for?

A2 is a common poster and drawing size: large enough to read from a few meters away, small enough to print on a large-format printer or to fold down to A4 in two folds. Because it is exactly four A4 pages, an A2 sheet is also a convenient way to see a four-page A4 layout at full size.

Printer margins and printable areas are not included in these calculations. Printer specifications differ and change over time, so confirm your final layout with your printer’s current template.

Sources (checked 13 October 2026): ISO · Wikipedia

Worked examples

InputResult
A2, custom 600 DPI, fit onto A4420 × 594 mm = 16.535 × 23.386 in; 4961 × 7016 px at 300 DPI; scale to A4: 50 %
A2, custom 300 DPI, fit onto ARCH C420 × 594 mm = 16.535 × 23.386 in; 4961 × 7016 px at 300 DPI; scale to ARCH C: 102.6 %
A2, custom 150 DPI, fit onto A3420 × 594 mm = 16.535 × 23.386 in; 4961 × 7016 px at 300 DPI; scale to A3: 70.71 %

Calculated by the tool above; open it with the same values to see each step.

Frequently asked questions

Why is A2 shown as 16.535 inches and not 16.5 inches?

The inch value is the exact conversion of 420 mm, which is 16.535433… inches. The tool shows three decimal places. Rounding to 16.5 would be a small approximation.

How many A4 sheets make one A2 sheet?

Four A4 sheets make one A2 sheet. A4 is 210 × 297 mm, and two of them side by side and two stacked match the 420 × 594 mm size of A2.

What is A2 in pixels at 300 DPI?

At 300 DPI, A2 is 4961 × 7016 pixels. At 72 DPI it is 1191 × 1684 pixels, and at 150 DPI it is 2480 × 3508 pixels. You can also enter your own value in “Custom DPI”.

What does a 50 % scale mean for A2 onto A4?

It means each side of the A2 sheet must be reduced to half its length to fit A4. The result is a 210 × 297 mm image. Scaling to a smaller size is always a percentage below 100 %.

Does the tool include printer margins?

No. The tool does not model printer margins or printable area. Check the printable area in your printer’s current template before you finalize a layout.

Do I need an account to use this tool?

No. The tool is free and needs no sign-up. Everything runs in your browser, and nothing you enter is uploaded.